Watch Catalog

Casio module 3466

Quartz module. 3466 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 1 watch in the catalog runs on it.

How to operate module 3466

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Timekeeping Mode, hold A for at least two seconds and release it when SET stops flashing.
  2. Press C to move through the settings: daily step target, seconds, hour, minute, 12/24-hour format, year, month, day, button tone, light duration.
  3. On the seconds, press D to reset them to 00.
  4. On any other setting, use D and E to change it.
  5. Press A to leave the setting screen.

Good to know

Resetting the seconds between 30 and 59 adds one minute.

In 12-hour format, P marks p.m. times.

From Casio's guide, page E-16

Set an alarm

  1. Press C five times from the Timekeeping Mode to reach the Alarm Mode.
  2. Press D to pick the alarm, AL1 to AL5.
  3. Hold A for at least two seconds and release it when the hour digits flash.
  4. Use D and E to set the hour, press C to move to the minutes, then D and E again.
  5. Press A to leave the setting screen.

Good to know

In the Alarm Mode, press E on an alarm or on SIG (hourly signal) to turn it on or off.

The alarm sounds for 10 seconds; press any button to stop it.

From Casio's guide, page E-52

Light

  1. Press B to light the face.
  2. To change the duration: in the Timekeeping Mode hold A until SET stops flashing, then press C nine times to show LT.
  3. Press D to switch between 1.5 seconds (1) and 3 seconds (3), then press A to leave.

From Casio's guide, page E-58

Button beep

  1. In the Timekeeping Mode, hold A for at least two seconds and release it when SET stops flashing.
  2. Press C eight times: KEY♪ or MUTE flashes.
  3. Press D to switch, then A to leave.

Good to know

An indicator shows while the button tone is off.

From Casio's guide, page E-62

Stopwatch

  1. Press C once from the Timekeeping Mode to reach the Stopwatch Mode.
  2. Press D to start, D to stop, and D again to carry on.
  3. While it runs, press E to take a split and lap time.
  4. When it is stopped, press E to reset it to zero.

Good to know

It counts up to 23 hours 59 minutes 59 seconds, in 1/100 seconds for the first hour.

Up to 200 split and lap records are kept and can be viewed in the Recall Mode.

From Casio's guide, page E-35

Countdown timer

  1. Press C three times from the Timekeeping Mode to reach the Timer Mode.
  2. Hold A for at least two seconds: the minutes flash.
  3. Use D and E to set the minutes, press C for the seconds, then D and E again.
  4. Press A to leave the setting screen.
  5. Press D to start, pause and resume the countdown.
  6. To reset it to the start time, pause it and press E.

Good to know

The start time goes up to 60 minutes; 0 minutes 00 seconds means 60 minutes.

At zero the watch beeps for 10 seconds; press any button to stop it.

From Casio's guide, page E-46

Module 3466 specs

Type
quartz
Power
Approx. battery life: 3 years on CR2025 · other watches that take CR2025
Accuracy
±30 seconds per month
Functions
World time, Stopwatch, Timer, Alarm/hourly time signal, Light, Light color, Calendar, Mute feature, 12/24-hour format
Manual
Casio's operation guide for module 3466

Watches with the 3466