Watch Catalog

Casio module 3475

Quartz module. 3475 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 1 watch in the catalog runs on it.

How to operate module 3475

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Timekeeping Mode, hold A for at least two seconds to open the setting screen.
  2. Move the pointer to TIME ADJUSTMENT with A and D, press C, then select MANUAL and press C; the hour is selected.
  3. Change the hour with A and D, then press C to move to the minute.
  4. Set the minute, year, month and day the same way, pressing C after each.
  5. Select YES with A and D and press C to save.
  6. Press E twice to leave the setting screen.

Good to know

Use this only when GPS reception or the phone connection is not possible; the watch normally sets itself.

12/24-hour format is under TIME ADJUSTMENT too, as 12/24H.

From Casio's guide, page 14

Daylight saving time

  1. In the Timekeeping Mode, hold A for at least two seconds to open the setting screen.
  2. Move the pointer to HOME TIME with A and D and press C.
  3. Move the pointer to DST and press C.
  4. Choose AUTO, OFF (always standard time) or ON (always summer time) with A and D, then press C.
  5. Press E twice to leave.

Good to know

AUTO is the factory setting and switches between standard and summer time by itself.

From Casio's guide, page 14

Home City

  1. In the Timekeeping Mode, hold A for at least two seconds to open the setting screen.
  2. Move the pointer to HOME TIME with A and D and press C.
  3. Move the pointer to CITY and press C.
  4. Pick the city with A and D, then press C.
  5. Press E twice to leave.

From Casio's guide, page 14

Set an alarm

  1. In the Timekeeping Mode, hold A for at least two seconds to open the setting screen.
  2. Move the pointer to ALARM with A and D and press C.
  3. Pick one of the four alarms and press C.
  4. Choose OFF, ON or ON (SNZ) for snooze with A and D, then press C.
  5. Set the hour with A and D, press C, set the minute, press C.
  6. Select YES and press C to save, then press E twice to leave.

Good to know

With snooze on, the alarm repeats every five minutes, up to seven times.

Press any button to stop a sounding alarm.

From Casio's guide, page 46

Light

  1. Press B to light the face.
  2. For the duration: in the Timekeeping Mode hold A for at least two seconds, select LIGHT and press C.
  3. Select DURATION, press C, choose 1.5 SEC. or 3.0 SEC. with A and D, then press C.
  4. Press E twice to leave.

Good to know

AUTO LIGHT in the same LIGHT menu lights the face when you tilt the watch 40 degrees or more towards you.

From Casio's guide, page 9

Button beep

  1. In the Timekeeping Mode, hold A for at least two seconds to open the setting screen.
  2. Move the pointer to BEEP with A and D and press C.
  3. Move the pointer to OPERATION and press C.
  4. Choose ON or OFF with A and D, then press C.
  5. Press E twice to leave.

From Casio's guide, page 48

Stopwatch

  1. From the Timekeeping Mode, press D three times to reach the Stopwatch Mode.
  2. Press C to start, C to stop, and C again to resume.
  3. For a split time, press E while it runs; press E again to release it.
  4. When it is stopped, press E to reset it to zero.

Good to know

It counts in one-second steps up to 99 hours 59 minutes 59 seconds.

From Casio's guide, page 44

Countdown timer

  1. From the Timekeeping Mode, press D twice to reach the Timer Mode.
  2. Hold A for at least two seconds, set the number of repeats (1 to 20) with A and D, and press C.
  3. Choose the timer's place in the sequence with A and D and press C.
  4. Set the minutes with A and D, press C, set the seconds, press C.
  5. Select YES and press C to save.
  6. Press C to start, pause and resume; on a paused countdown, press E to go back to the start time.

Good to know

A single timer runs up to 60 minutes; up to five timers can be chained for interval training.

At zero the watch beeps and/or vibrates for 10 seconds; press any button to stop it.

From Casio's guide, page 43

Reset

  1. In the Timekeeping Mode, hold A for at least two seconds to open the setting screen.
  2. Move the pointer to RESET ALL SETTINGS with A and D and press C.
  3. Select EXECUTE and press C.
  4. Select YES and press C; the watch resets and returns to the Timekeeping Mode.
  5. When AC appears in the lower right corner, press A to clear it.

Good to know

This also clears the training log and notifications and deletes the phone pairing.

Reset is not possible with a low battery or with Airplane Mode on.

From Casio's guide, page 50

Module 3475 specs

Type
quartz
Power
Charging system compatible with dedicated cable (requires device with Type-A USB terminal)
Accuracy
±15 seconds per month (with no GPS signal reception and mobile link function)
Functions
World time, Stopwatch, Timer, Alarm/hourly time signal, Light, Light color, Calendar, Mute feature, Energy saving feature, Battery display/alert, Run time, 12/24-hour format, Flight mode, User profile creation, Vibration on/off, Vibrator, Sensor feature details
Manual
Casio's operation guide for module 3475

Watches with the 3475