Watch Catalog

Casio module 3513

Solar powered module. 3513 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 5 watches in the catalog run on it.

How to operate module 3513

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Timekeeping Mode, hold E for at least two seconds and let go when the Home City name appears.
  2. Press D to step through the settings: Home City, summer time, 12/24-hour format, seconds, hours, minutes, year, month, day, then button tone, light duration and Power Saving.
  3. On the seconds, press A to reset them to 00.
  4. On any other setting, press A or C to change it (hold for fast).
  5. Press E twice to finish.

Good to know

Set the Home City before the time and date.

Resetting the seconds between 30 and 59 adds one minute.

From Casio's guide, page 11

Daylight saving time

  1. In the Timekeeping Mode, hold E for at least two seconds and let go when the Home City name appears.
  2. Press D once to reach the summer time setting.
  3. Press A to choose ON (summer time) or OFF (standard time).
  4. Press E twice to finish. DST shows while summer time is on.

From Casio's guide, page 10

Home City

  1. In the Timekeeping Mode, hold E for at least two seconds and let go when the Home City name appears.
  2. Press A or C to scroll through the cities (hold for fast).
  3. Press E twice to finish.

From Casio's guide, page 10

Set an alarm

  1. Press D until the Alarm Mode shows.
  2. Press A or C to pick an alarm: AL-1 to AL-4, or SNZ for the snooze alarm.
  3. Hold E for at least two seconds and let go when the hour flashes; the alarm is turned on.
  4. Press A or C to set the hour, press D to move to the minutes, then A or C again.
  5. Press E to finish.

Good to know

In the Alarm Mode, press B on an alarm or on SIG (hourly signal) to turn it on or off.

The snooze alarm repeats up to seven times, five minutes apart.

From Casio's guide, page 13

Light

  1. Press L to light the face.
  2. For Auto Light, hold L for at least three seconds in the Timekeeping Mode; LT shows while it is on, and the face lights when you tilt the watch towards you.
  3. To change the duration: hold E until the Home City name appears, then press D ten times to reach LIGHT.
  4. Press A to choose 1 (1.5 seconds) or 3 (3 seconds), then E twice to finish.

From Casio's guide, page 9

Button beep

  1. In the Timekeeping Mode, hold E for at least two seconds and let go when the Home City name appears.
  2. Press D nine times: key or MUTE flashes.
  3. Press A to switch between them, then E twice to finish.

Good to know

Alarm and timer tones still sound while the button tone is muted.

From Casio's guide, page 30

Stopwatch

  1. Press D until the Stopwatch Mode shows.
  2. Press A to start and A again to stop; A resumes.
  3. While running, press C to freeze a split time, and C again to release it.
  4. When stopped, press C to reset to zero.

From Casio's guide, page 28

Countdown timer

  1. Press D until the Timer Mode shows.
  2. Hold E for at least two seconds and let go when the hours flash.
  3. Press A or C to set the hours, press D, then set the minutes the same way.
  4. Press E to finish.
  5. Press A to start, pause and resume; when paused, press C to go back to the start time.

Good to know

A start time of 0H00'00 counts down 24 hours.

From Casio's guide, page 29

Module 3513 specs

Type
solar
Power
Solar powered
Accuracy
±15 seconds per month
Functions
World time, Sunrise/sunset display, Stopwatch, Timer, Alarm/hourly time signal, Light, Light color, Calendar, Mute feature, Energy saving feature, Battery display/alert, Run time, 12/24-hour format, Duplex LC display
Manual
Casio's operation guide for module 3513

Watches with the 3513