Set the time and date
- In the Calendar Mode, unscrew the crown and pull it out to the second click: the second hand moves to 12 o'clock and the mode hand to SU.
- Turn the crown to set the hour and minute hands.
- Press A, then press B to change the month and turn the crown to change the day.
- Press A and turn the crown to set the tens digit of the year.
- Press A and turn the crown to set the ones digit of the year.
- Push the crown back in on a time signal at the top of a minute, and screw it in.
Good to know
From any other mode, hold A for about two seconds to go to the Calendar Mode.
While it is connected with a phone running CASIO WATCH+, the watch takes its time and date from the phone; setting it by hand is for when it is not connected.
To take the time from a paired phone now, open CASIO WATCH+ and hold C for about 0.5 seconds: the second hand points to R, then to the Bluetooth mark when it connects, and the time is adjusted.
Setting the time by hand on the watch cancels the automatic switching between standard time and summer time.
The Dual Time on the small dial moves along with the time; crown operation is disabled while the mode hand or the Dual Time hands are moving.
Turning the crown quickly several times moves the hands fast; turn it the other way or press any button to stop them.
If you do nothing for about two minutes with the crown pulled out, the crown stops working: push it in and pull it out again.
The crown screws down: unscrew it (towards you) before pulling it out, and screw it back in as you push it in, to keep the watch water resistant.
From Casio's guide, page 9