Watch Catalog

Casio module 5512

Solar powered module. 5512 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 2 watches in the catalog run on it.

How to operate module 5512

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Calendar Mode (normal timekeeping), unscrew the crown and pull it out to the second click: the second hand moves to A (a.m.) or P (p.m.).
  2. Turn the crown to set the hour and minutes. The Dual Time moves along with it.
  3. Press A, then press B to change the month.
  4. Turn the crown to change the day.
  5. Press A and turn the crown to point the second hand at the tens digit of the year.
  6. Press A and turn the crown to point the second hand at the ones digit of the year.
  7. Push the crown back in on a time signal, at the top of a minute, and screw it in.
  8. To take the time from a paired phone instead: with CASIO WATCHES running, press C in the Calendar Mode. The retrograde dial hand moves to R, then to the Bluetooth mark when the watch connects and takes the phone's time.

Good to know

Paired with a phone, the watch sets itself about four times a day while it is in the Calendar Mode; set it by hand when it is not connected to a phone.

Setting the time by hand cancels automatic summer time switching.

The day of the week is set automatically from the date.

With no operation for about two minutes after you pull out the crown, the crown stops working; push it in and pull it out again.

Turning the crown quickly a few times starts fast forward or reverse; turn it the other way or press any button to stop.

From Casio's guide, page 11

Summer time

  1. Open the CASIO WATCHES app on your phone.
  2. On the watch, hold C for about two seconds: the second hand moves to 12 o'clock. Keep holding until it makes one full turn and the watch connects.
  3. In the app, follow the screen to change the Home City summer time setting (Auto, ON or OFF).

Good to know

The watch has no button setting for summer time; it is set from the app.

With Auto, the watch keeps switching between standard and summer time by itself, even when it is not connected to the phone.

From Casio's guide, page 9

Change time zone when you travel

  1. Before you leave, set the Dual Time to your destination: in the Calendar Mode pull the crown out to the first click, turn it to set the Dual Time in 15-minute steps, then push it back in. A World Time city can also be set in the CASIO WATCHES app.
  2. Turn off auto time adjustment: open the app, hold C on the watch for about two seconds until the second hand makes one full turn, then follow the app.
  3. When you arrive, hold B for about three seconds in the Calendar Mode to swap the current location time and the Dual Time.
  4. Turn auto time adjustment back on in the app (connect the same way).

Good to know

When you swap with the small hour and minute hands used for Dual Time, only the time is swapped, not the date.

Auto time adjustment does not work for 24 hours after a swap of the Home Time and World Time.

From Casio's guide, page 16

Set an alarm

  1. In the Calendar Mode, press A twice: the watch goes to the Stopwatch Mode, then the Alarm Mode (the mode hand points to AL).
  2. Unscrew the crown and pull it out to the first click: this switches the alarm on.
  3. Turn the crown to set the alarm time on the small hour and minute hands; check the small 24-hour hand for a.m. or p.m.
  4. Push the crown back in and screw it in.
  5. Press A once to go back to the Calendar Mode.
  6. To switch the alarm on or off: in the Alarm Mode, each press of B moves the second hand between ON and OFF.

Good to know

The alarm sounds for 10 seconds every day at the set time; press any button to stop it.

The beeper is muted when the charge is low or the watch is in Level 2 power saving.

You can also set the alarm with the CASIO WATCHES app.

From Casio's guide, page 15

Realign the hands

  1. Unscrew the crown and pull it out to the first click.
  2. Hold D for about five seconds: the second hand makes one full turn. Turn the crown to set the second hand at 12 o'clock.
  3. Press A and turn the crown to set the hour and minute hands at 12 o'clock.
  4. Press A and turn the crown to set the retrograde dial hand at 0.
  5. Press A and turn the crown to set the small hour, small minute and small 24-hour hands at 12 o'clock.
  6. Press A and turn the crown to set the mode hand at the check mark.
  7. Press A and turn the crown to bring 1 to the center of the day indicator.
  8. Push the crown back in and screw it in.

Good to know

Strong magnetism or a knock can put the hands or the day indicator out of alignment. With a paired phone, the CASIO WATCHES app can also realign them.

From Casio's guide, page 15

Button tone

  1. Open the CASIO WATCHES app on your phone.
  2. On the watch, hold C for about two seconds: the second hand moves to 12 o'clock. Keep holding until it makes one full turn and the watch connects.
  3. In the app, choose the watch operation tone setting and follow the screen.

Good to know

The operation tone can only be switched on or off from the app.

From Casio's guide, page 9

Stopwatch

  1. In the Calendar Mode, press A once to enter the Stopwatch Mode.
  2. Press B to start, B to stop, B again to resume.
  3. For a split time, press D while it runs: the split time shows for about five seconds while timing goes on.
  4. When it is stopped, press D to reset it to all zeros.
  5. Press A twice to go back to the Calendar Mode.

Good to know

It counts in 1/20 second steps up to 23 hours 59 minutes 59.95 seconds; after 24 hours it stops and resets to all zeros.

Up to 100 split times are kept per measurement; starting a new measurement deletes the previous one, so send it to the CASIO WATCHES app first if you want to keep it.

To pick the lap target type: pull the crown out to the first click, turn it to choose F (Fastest) or T (Target), then push it back in. The Target value itself is set in the app.

To switch the lap target alert tone on or off: pull the crown out to the first click, hold B for about two seconds, then push it back in.

The watch cannot connect with a phone while the stopwatch is running.

From Casio's guide, page 12

Factory reset

  1. Unscrew the crown and pull it out to the second click.
  2. Hold C for about five seconds: the second hand moves to 12 o'clock and then to A or P.
  3. Push the crown back in and screw it in.

Good to know

This resets the stopwatch (Target value off, type Fastest, lap data deleted), the alarm (12:00 midnight, off), mute off, connection time three minutes and auto adjust off.

To delete the phone pairing from the watch instead: pull the crown out to the second click, hold D for about five seconds until the second hand makes one turn, then push the crown back in.

From Casio's guide, page 9

Module 5512 specs

Type
solar
Power
Solar powered
Accuracy
±15 seconds per month (with no mobile link function)
Functions
World time, Stopwatch, Alarm/hourly time signal, Calendar, Energy saving feature, Battery display/alert, Run time, Date display
Manual
Casio's operation guide for module 5512

Watches with the 5512