Watch Catalog

Casio module 5513

Solar powered module. 5513 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 1 watch in the catalog runs on it.

How to operate module 5513

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Calendar Mode, pull the crown out to the second click: the second hand moves to A (a.m.) or P (p.m.).
  2. Turn the crown to set the hour and minute hands.
  3. Press A, then press B to change the month and turn the crown to change the day.
  4. Press A and turn the crown to set the tens digit of the year.
  5. Press A and turn the crown to set the ones digit of the year.
  6. Push the crown back in on a time signal at the top of a minute.

Good to know

From any other mode, hold A for about two seconds to go to the Calendar Mode.

Paired with a phone running CASIO WATCHES, the watch corrects its time four times a day, at around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m.; setting it by hand is for when it is not connected to a phone.

To take the time from a paired phone now, press C: the second hand moves to R, then to C, and the time is synchronized.

Setting the time by hand on the watch cancels the automatic switching between standard time and summer time. Summer time and the Home City are set with the CASIO WATCHES app.

The day of the week follows the date by itself.

The Dual Time on the small dial moves along with the time; crown operation is disabled while its hands are moving.

To set the Dual Time, pull the crown out to the first click (the second hand moves to 12 o'clock), turn it to set the Dual Time in 15-minute steps, then push it back in.

Hold B for about three seconds to swap the current location time and the Dual Time.

Turning the crown quickly several times moves the hands fast; turn it the other way or press any button to stop them.

The crown screws down: unscrew it (towards you) before pulling it out, and screw it back in as you push it in, or the watch may lose water resistance.

From Casio's guide, page 11

Set the alarm

  1. In the Calendar Mode, press A until the mode hand points to ALM, after the Stopwatch and Timer Modes.
  2. Pull the crown out to the first click: this switches the alarm on.
  3. Turn the crown to set the alarm time on the small dial.
  4. Push the crown back in.
  5. Press A once to go back to the Calendar Mode.

Good to know

In the Alarm Mode, press D to switch the alarm on or off; the second hand points to ON or OFF.

The alarm sounds for 10 seconds; press any button to stop it.

The alarm does not sound when the battery is low or the watch is in Level 2 power saving.

You can also set the alarm with the CASIO WATCHES app.

The crown screws down: unscrew it (towards you) before pulling it out, and screw it back in as you push it in, or the watch may lose water resistance.

From Casio's guide, page 13

Realign the hands and day indicator

  1. Pull the crown out to the first click.
  2. Hold D for about five seconds: the second hand makes one full turn. Turn the crown to put it on 12 o'clock.
  3. Press A and turn the crown to put the hour and minute hands on 12 o'clock.
  4. Press A and turn the crown until the battery level indicator shows three dark sectors between three light ones, as drawn on page 14 of Casio's guide.
  5. Press A and turn the crown to put the small hour and minute hands on 12 o'clock and the small 24-hour hand on 24.
  6. Press A and turn the crown to put the mode hand on S.
  7. Press A and turn the crown until 1 is in the center of the day indicator, with the mode hand on S.
  8. Push the crown back in.

Good to know

Strong magnetism or impact can knock the hands or the day indicator out of alignment.

If the watch shows the wrong time even though it connects with a phone, realign the hands; this can also be done with the CASIO WATCHES app.

The crown screws down: unscrew it (towards you) before pulling it out, and screw it back in as you push it in, or the watch may lose water resistance.

From Casio's guide, page 14

Light

  1. In the Calendar Mode or the Alarm Mode, press B to turn on the light.

Good to know

The light goes off by itself when the alarm starts to sound, and does not work while the hands move at high speed.

From Casio's guide, page 14

Stopwatch

  1. In the Calendar Mode, press A: the mode hand points to STW.
  2. Press B to start, B to stop, and B again to resume.
  3. For a split time, press D while it runs; the split shows for 5 seconds.
  4. When it is stopped, press D to reset it to zero.
  5. Press A three times to go back to the Calendar Mode.

Good to know

It counts up to 23 hours 59 minutes 59 seconds; at 24 hours it stops and resets to zero by itself.

Up to 100 split times can be taken in one measurement.

The watch cannot connect with a phone while the stopwatch is running.

From Casio's guide, page 12

Countdown timer

  1. In the Calendar Mode, press A until the mode hand points to TMR, after the Stopwatch Mode.
  2. Pull the crown out to the first click, turn it to set the start time, then push it back in.
  3. Press B to start; press B again to pause. When it is paused, press D to reset it to the start time.
  4. Press A twice to go back to the Calendar Mode.

Good to know

The start time is set in 1-minute steps up to 24 hours; for 24 hours, put the small 24-hour hand on 24.

At zero it beeps for 10 seconds; press any button to stop it. It does not beep when the battery is low.

You can also set the start time with the CASIO WATCHES app.

The crown screws down: unscrew it (towards you) before pulling it out, and screw it back in as you push it in, or the watch may lose water resistance.

From Casio's guide, page 13

Factory reset

  1. Pull the crown out to the second click.
  2. Hold C for about five seconds: the second hand moves to 12 o'clock.
  3. Push the crown back in.

Good to know

This clears the stopwatch, sets the timer to 10 minutes and the alarm to 12:00 midnight and off, turns mute and auto adjust off and sets the connection time to 3 minutes.

If the watch will not pair again after unpairing, delete its pairing information: pull the crown out to the second click, hold D for about five seconds until the second hand makes one full turn, then push the crown back in.

The crown screws down: unscrew it (towards you) before pulling it out, and screw it back in as you push it in, or the watch may lose water resistance.

From Casio's guide, page 9

Module 5513 specs

Type
solar
Power
Tough Solar (Solar powered)
Accuracy
±15 seconds per month (with no mobile link function)
Functions
World time, Stopwatch, Alarm/hourly time signal, Light, Light color, Calendar, Energy saving feature, Battery display/alert, Run time, Date display, Day indicator
Manual
Casio's operation guide for module 5513

Watches with the 5513