Watch Catalog

Casio module 5522

Quartz module. 5522 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 2 watches in the catalog run on it.

How to operate module 5522

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Timekeeping Mode, hold A until SET Hold stops flashing and the city code flashes.
  2. Press C to step through the settings: Home City, DST, 12/24-hour format, seconds, hour, minute, year, month, day, then button tone and light duration.
  3. On the seconds, press D to reset them to 00.
  4. On the hour, minute, year, month or day, press D to go up and B to go down (hold for fast).
  5. On the 12/24-hour format, press D to switch.
  6. Press A to leave the setting mode.

Good to know

Resetting the seconds between 30 and 59 adds one minute.

Set the Home City first: world time is worked out from it.

From Casio's guide, page E-21

Daylight saving time

  1. In the Timekeeping Mode, hold A until the city code flashes.
  2. Press C once to reach the DST setting.
  3. Press D to switch between ON (summer time) and OFF (standard time).
  4. Press A to leave. The DST indicator shows while summer time is on.

Good to know

DST cannot be switched while UTC is the Home City.

If the time is off by one hour, you may need to change this setting, not the time.

From Casio's guide, page E-20

Home City

  1. In the Timekeeping Mode, hold A until the city code flashes.
  2. Press D or B to scroll through the city codes (hold for fast).
  3. Press A to leave.

Good to know

If the time is off by several hours, the Home City may be wrong.

From Casio's guide, page E-18

Set an alarm

  1. Press C until the Alarm Mode shows.
  2. Press D to pick the alarm: AL1 to AL4, or SNZ for the snooze alarm.
  3. Hold A until the hour digits flash; ALM appears.
  4. Press D or B to set the hour, press C to move to the minutes, then D or B again.
  5. Press A to leave.

Good to know

In the Alarm Mode, press B to turn the shown alarm or the hourly signal (SIG) on or off; hold D to test the sound.

The SNZ alarm repeats every five minutes, up to seven times.

From Casio's guide, page E-44

Realign the hands

  1. In the Timekeeping Mode, hold A for about five seconds, until 0:00 flashes.
  2. If the hour and minute hands are not at 12 o'clock, press D or B until they are.
  3. Press A to go back to the Timekeeping Mode.
  4. Check that the hands match the digital time; repeat if they do not.

Good to know

Strong magnetism or a hard knock can put the hands out of line with the digital time.

From Casio's guide, page E-50

Light

  1. Press L in any mode to light the display.
  2. To change the duration: in the Timekeeping Mode hold A until the city code flashes, then press C ten times.
  3. Press D to switch between 3 seconds (3) and 1.5 seconds (1).
  4. Press A to leave.

From Casio's guide, page E-47

Button beep

  1. In the Timekeeping Mode, hold A until the city code flashes.
  2. Press C nine times: the screen shows KEY♪ or MUTE.
  3. Press D to switch, then A to leave.

Good to know

Alarms, the hourly signal and the target time alarm still sound with the beep off.

From Casio's guide, page E-52

Stopwatch

  1. Press D in the Timekeeping Mode: the stopwatch opens and, if it was at zero, starts at once.
  2. Press D to stop, and D again to resume.
  3. While running, press B for a split time (SPL shows), and B again to release it.
  4. When stopped, press B to reset.

Good to know

It counts up to 23 hours, 59 minutes, 59.99 seconds, then starts again from zero.

From Casio's guide, page E-28

Module 5522 specs

Type
quartz
Power
Approx. battery life: 5 years on CR2016 · other watches that take CR2016
Accuracy
±15 seconds per month
Functions
World time, Stopwatch, Timer, Alarm/hourly time signal, Light, Light color, Calendar, Mute feature, 12/24-hour format, Hand shift feature
Manual
Casio's operation guide for module 5522

Watches with the 5522