Watch Catalog

Casio module 5602

Quartz module. 5602 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 4 watches in the catalog run on it.

How to operate module 5602

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Timekeeping Mode, hold E for at least two seconds, until the Home City name shows.
  2. Press E: the seconds flash.
  3. Press D to step through the settings: seconds, hours, minutes, year, month, then day.
  4. On the seconds, press C to reset them to 00.
  5. On any other setting, press C or A to change it.
  6. Press E to leave the setting screen.
  7. To switch between 12-hour and 24-hour format: hold E for at least two seconds until the Home City name shows, press D four times, press C to pick 12H or 24H, then press E twice.

Good to know

Resetting the seconds between 30 and 59 adds one minute.

Paired with the CASIO WATCHES phone app, the watch corrects its time from the phone; press B in the Timekeeping Mode to connect now.

From Casio's guide, page 8

Daylight saving time

  1. In the Timekeeping Mode, hold E for at least two seconds, until the Home City name shows.
  2. Press D once to reach the summer time setting.
  3. Press C to cycle through AUTO, OFF (standard time) and ON (summer time).
  4. Press E twice to leave. The DST indicator shows while summer time is on.

Good to know

If the time is off by one hour or 30 minutes, the summer time setting may be wrong.

AUTO, the factory setting for all cities, switches between summer and standard time by itself.

From Casio's guide, page 8

Home City

  1. In the Timekeeping Mode, hold E for at least two seconds, until the Home City name shows.
  2. Press A or C to pick the city.
  3. Press D, then press E twice to leave.

Good to know

In the World Time Mode, hold L for at least two seconds to swap the Home City and the World Time City, handy after a flight.

From Casio's guide, page 8

Set an alarm

  1. Press D until the Alarm Mode shows.
  2. Press A or C to pick one of the five alarms, AL1 to AL5.
  3. Hold E for at least two seconds, until the hour flashes.
  4. Press A or C to set the hour (in 12-hour format, P marks p.m.), press D to move to the minutes, A or C again.
  5. Press E to leave.

Good to know

In the Alarm Mode, press E on an alarm or on SIG (the hourly signal) to turn it on or off.

An alarm beeps for ten seconds; press any button to stop it.

From Casio's guide, page 32

Realign the hands

  1. In the Timekeeping Mode, hold E for at least five seconds, until 00 flashes.
  2. If the second hand is not at 12 o'clock, press A or C to move it there.
  3. Press D to switch to the hour and minute hands.
  4. If they are not both at 12 o'clock, press A or C to move them there.
  5. Press E to leave.

Good to know

Hands drift from the digital time after a hard knock or strong magnetism; the digital time itself is still right.

To move the hands out of the way of the display, hold L and press D; do the same again to bring them back.

From Casio's guide, page 35

Light

  1. Press L to light the face.
  2. For Auto Light (lights up when you tilt the watch toward you), hold L for at least three seconds in the Timekeeping Mode; LT shows while it is on.
  3. To change the duration: in the Timekeeping Mode hold E for at least two seconds until the Home City name shows, then press D three times to reach LT.
  4. Press C to choose 1.5 seconds (1) or 3 seconds (3), then press E twice to leave.

Good to know

Auto Light switches itself off after about six hours, and does not work in the Compass Mode.

From Casio's guide, page 6

Button beep

  1. In the Timekeeping Mode, hold E for at least two seconds, until the Home City name shows.
  2. Press D twice: KEY♪ or MUTE flashes.
  3. Press C to switch, then E twice to leave.

Good to know

Alarms and the timer still sound with the beep off.

From Casio's guide, page 35

Stopwatch

  1. Press D until the Stopwatch Mode shows.
  2. Press C to start, C to stop, and C again to carry on.
  3. When it is stopped, press A to reset it to zero.
  4. For a split time, press A while it runs; press A again to let the display catch up.

Good to know

It counts in 1/100 seconds for the first hour, then in seconds, up to 24 hours.

From Casio's guide, page 31

Countdown timer

  1. Press D until the Timer Mode shows.
  2. Hold E for at least two seconds, until the minutes flash.
  3. Press A or C to set the minutes, press D to move to the hours, A or C again.
  4. Press E to leave the setting screen.
  5. Press C to start; press C again to pause and resume.
  6. To go back to the start time, pause with C and then press A.

Good to know

The start time is set in whole minutes up to 24 hours.

It beeps for ten seconds at zero; press any button to stop it.

From Casio's guide, page 32

Reset

  1. In the Timekeeping Mode, hold E for at least two seconds, until the Home City name shows.
  2. Press E: the seconds flash.
  3. Hold A for at least five seconds, until RESET stops flashing.
  4. Press E to leave.

Good to know

This returns the watch settings, sensors, FISH Mode settings, step count, stopwatch, timer and alarms to factory defaults.

It also deletes the pairing with your phone.

From Casio's guide, page 36

Module 5602 specs

Type
quartz
Power
Approx. battery life: 2 years on CR2025 · other watches that take CR2025
Accuracy
±15 seconds per month (with no signal calibration)
Functions
World time, Moon data, Tide graph, Sunrise/sunset display, Stopwatch, Timer, Alarm/hourly time signal, Light, Light color, Calendar, Mute feature, 12/24-hour format, Fishing timer, Hand shift feature
Manual
Casio's operation guide for module 5602

Watches with the 5602