Watch Catalog

Casio module 5713

Solar powered module. 5713 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 1 watch in the catalog runs on it.

How to operate module 5713

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Timekeeping Mode, unscrew the crown and pull it out: the Home City appears.
  2. Press D: the hours and minutes flash. Turn the crown to set the minutes (the hour follows).
  3. Press B and turn the crown to set the hour.
  4. Press B for the year, then the month, then the day, turning the crown to set each.
  5. On a time signal at the top of a minute, push the crown back in and screw it down.

Good to know

When the watch is paired or can receive a time signal it sets itself; this is for when it cannot.

Crown operations switch off after about two minutes of no use; push the crown in and pull it out again.

From Casio's guide, page 27

Daylight saving time

  1. In the Timekeeping Mode, unscrew the crown and pull it out: the Home City appears.
  2. Press B to reach the summer time setting.
  3. Turn the crown to choose AUTO, OFF (standard time) or ON (summer time).
  4. Push the crown back in and screw it down.

Good to know

AUTO works only when the Home City is in an area where a time signal can be received.

From Casio's guide, page 27

Home City

  1. In the Timekeeping Mode, unscrew the crown and pull it out: the Home City appears.
  2. Turn the crown to pick your city.
  3. Push the crown back in and screw it down.

Good to know

In the World Time Mode, hold D for at least three seconds to swap the Home Time and World Time.

From Casio's guide, page 27

Set an alarm

  1. Press B until the Alarm Mode shows.
  2. Use A and C to pick the alarm, AL1 to AL5.
  3. Unscrew the crown and pull it out: the time flashes. Turn the crown to set the minutes (the hour follows).
  4. Press B and turn the crown to set the hour.
  5. Push the crown back in and screw it down.

Good to know

In the Alarm Mode, press D on an alarm or on SIG (hourly signal) to turn it on or off.

The alarm sounds for 20 seconds; press any button to stop it.

From Casio's guide, page 30

Realign the hands

  1. In the Timekeeping Mode, unscrew the crown and pull it out.
  2. Hold A for at least five seconds and release it when HAND SET shows and the second hand has gone once around: the hour, minute and second hands align themselves.
  3. Press B. If the bearing hand is not at 12 o'clock, turn the crown to move it there.
  4. Press B. If the function hand is not at 12 o'clock, turn the crown to move it there.
  5. Push the crown back in and screw it down, then check the hands against the digital time; repeat if they differ.

Good to know

Strong magnetism or impact can move the hands away from the correct time.

From Casio's guide, page 48

Light

  1. Press E to light the face.
  2. For Auto Light: in the Timekeeping Mode pull out the crown, press B three times, turn the crown to choose ON or OFF, then push the crown back in.
  3. For the duration: pull out the crown, press B four times to show LIGHT, turn the crown to choose 1 (1.5 seconds) or 3 (3 seconds), then push the crown back in.

From Casio's guide, page 13

Button beep

  1. In the Timekeeping Mode, unscrew the crown and pull it out.
  2. Press B twice: KEY♪ or MUTE flashes.
  3. Turn the crown to choose, then push the crown back in and screw it down.

Good to know

Alarm and timer tones still sound with the button tone muted.

From Casio's guide, page 48

Stopwatch

  1. Press B until the Stopwatch Mode shows.
  2. Press A to start, A to stop, and A again to carry on.
  3. While it runs, press C for a split time; press C again to release it.
  4. When it is stopped, press C to reset it to zero.

Good to know

It counts up to 23 hours 59 minutes 59.99 seconds.

From Casio's guide, page 46

Countdown timer

  1. Press B until the Timer Mode shows.
  2. Unscrew the crown and pull it out: the minutes flash.
  3. Turn the crown to set the start time, then push the crown back in and screw it down.
  4. Press A to start, pause and resume the countdown.
  5. To reset a paused countdown to its start time, press C.

Good to know

The start time is set in whole minutes, up to 60. At zero a beeper sounds for 10 seconds; press any button to stop it.

From Casio's guide, page 47

Reset

  1. In the Timekeeping Mode, unscrew the crown and pull it out.
  2. Hold D for at least seven seconds and release it when CLEAR ALL changes to CLEAR.
  3. Push the crown back in and screw it down.

Good to know

This returns settings, sensors, records, stopwatch, timer and alarms to factory defaults, and also unpairs the phone.

It cannot be done while Mission Log is on.

From Casio's guide, page 49

Module 5713 specs

Type
solar
Power
Tough Solar (Solar powered)
Accuracy
±15 seconds per month (with no signal calibration and mobile link function)
Functions
World time, Sunrise/sunset display, Stopwatch, Timer, Alarm/hourly time signal, Light, Light color, Calendar, Mute feature, Hand home position correction feature, Energy saving feature, Battery display/alert, Run time, 12/24-hour format, Hand shift feature, Time adjustment details
Manual
Casio's operation guide for module 5713

Watches with the 5713