Watch Catalog

Casio module 5746

Solar powered module. 5746 is the number engraved on the caseback of these watches, and Casio files its operation manual under it. 1 watch in the catalog runs on it.

How to operate module 5746

Short steps in our words. The buttons are lettered as in Casio's operation guide, where each task's page is given.

Set the time and date

  1. In the Timekeeping Mode, hold A for at least two seconds and release it when the Home City name shows: the hands move out of the way.
  2. Press C until the setting you want flashes: Home City, summer time, seconds, hours, minutes, year, month, day, 12/24-hour timekeeping, and more.
  3. On the seconds, press D to reset them to 00.
  4. On the other settings, press B or D to change the value (hold for fast).
  5. Repeat the last steps for each setting you want to change, then press A to finish.

Good to know

Paired with a phone running CASIO WATCHES, the watch corrects its time about four times a day; setting it by hand is for when it cannot connect with a phone.

Resetting the seconds between 30 and 59 adds one minute.

To switch between 12-hour and 24-hour timekeeping, press C eight times after the Home City shows, then press D.

With no operation for about two or three minutes, the watch leaves the setting screen by itself.

From Casio's guide, page 12

Summer time

  1. In the Timekeeping Mode, hold A for at least two seconds and release it when the Home City name shows.
  2. Press C once: the summer time setting flashes.
  3. Press D to step through AUTO, OFF and ON.
  4. Press A to finish.

Good to know

AUTO switches between standard time and summer time by itself; OFF always shows standard time; ON always shows summer time.

The factory default for all cities is AUTO.

This is the Home City summer time; the World Time city has its own summer time setting in the World Time Mode.

From Casio's guide, page 12

Change your Home City

  1. In the Timekeeping Mode, hold A for at least two seconds and release it when the Home City name shows.
  2. Press B or D to select the city (hold for fast).
  3. Press C to go on to the summer time setting, or press A to finish.

Good to know

When you travel: before boarding, set the World Time city to your destination and disable auto time correction; after arriving, press A and B together in the World Time Mode to swap the Home City and World Time, enable auto time correction again and correct the time.

The cities are listed in the City Table at the end of the manual.

From Casio's guide, page 11

Set an alarm

  1. Press C until the Alarm Mode shows (after the Timer Mode).
  2. Press D until the alarm you want (AL1 to AL5) shows.
  3. Hold A for at least two seconds and release it when the hour flashes.
  4. Press B or D to set the hour (hold for fast).
  5. Press C: the minutes flash. Press B or D to set them.
  6. Press A to exit the setting screen.
  7. To switch an alarm or the hourly time signal off or on, select it with D in the Alarm Mode and press A.

Good to know

In 12-hour timekeeping, P marks p.m.

The alarm beeps for 10 seconds; press any button to stop it.

The alarm indicator shows while an alarm is on.

The hourly time signal is the SIG screen in the Alarm Mode; press A there to switch it on or off.

The alarm is silent when the battery is low or the watch is in Level 2 power saving.

You can also set alarms with the CASIO WATCHES app.

From Casio's guide, page 15

Realign the hands

  1. In the Timekeeping Mode, hold A for at least five seconds and release it when SUB flashes.
  2. If the function hand is not at 12 o'clock, press B or D to align it.
  3. Press C to go on to the hour and minute hands.
  4. If they are not at 12 o'clock, press B or D to align them.
  5. Press A to exit the setting screen.

Good to know

Strong magnetism or a knock can put the hands out of alignment.

With a paired phone, the CASIO WATCHES app can also realign the hands.

With no operation for two or three minutes, the watch goes back to the Timekeeping Mode.

From Casio's guide, page 20

Light

  1. Press B to light the face and the digital display.
  2. To choose 1.5 or 3 seconds of light: in the Timekeeping Mode, hold A for at least two seconds until the Home City name shows, press C 12 times to show LIGHT, press D to select LT1 or LT3, then press A.

Good to know

The light goes off when an alarm starts to sound.

The light does not work while the hands are moving at high speed.

The light may flicker when it turns on or off.

From Casio's guide, page 5

Button tone on or off

  1. In the Timekeeping Mode, hold A for at least two seconds and release it when the Home City name shows.
  2. Press C 11 times: KEY♪ or MUTE flashes.
  3. Press D to select KEY♪ (tone on) or MUTE (tone off).
  4. Press A to exit the setting screen.

Good to know

The alarm and timer tones still sound while the button tone is muted.

From Casio's guide, page 21

Stopwatch

  1. Press C until the Stopwatch Mode shows (after the World Time Mode).
  2. Press D to start, D to stop, and D again to carry on.
  3. When it is stopped, press A to reset it to all zeros.
  4. For split or lap times: with the stopwatch reset, press A to choose SPL (split) or LAP, press D to start, press A for each split or lap, press D to stop, then A to reset.

Good to know

It counts in 1/100 second for the first hour and in seconds after that, for up to 24 hours.

A split or lap time shows for about eight seconds.

Up to 200 split and lap records are kept; when memory is full, the oldest is deleted. They can be sent to the CASIO WATCHES app.

From Casio's guide, page 17

Timer

  1. Press C until the Timer Mode shows (after the Stopwatch Mode).
  2. If a countdown is running, press D to pause it and A to reset it to the start time.
  3. Hold A for at least two seconds and release it when the minutes flash.
  4. Press B or D to set the minutes (hold for fast).
  5. Press C: the seconds flash. Press B or D to set them.
  6. Press A to exit the setting screen.
  7. Press D to start, D to pause and D to carry on; when paused, press A to reset it to the start time.

Good to know

The start time is one second to 60 minutes; 00'00 counts down 60 minutes.

At zero a beeper sounds for 10 seconds; press any button to stop it.

In the last 30 minutes, a countdown start tone sounds and the function hand shows the time left. The tone does not sound when the start time is 30 minutes or less.

The beeper is muted when the battery is low.

From Casio's guide, page 19

Factory reset

  1. In the Timekeeping Mode, hold A for at least two seconds and release it when the Home City name shows.
  2. Press C twice: the seconds flash.
  3. Hold B for at least seven seconds: ALL and RESET take turns on the display. Release it when only RESET shows.
  4. Press A to exit the setting screen.

Good to know

This returns the watch settings, stopwatch, timer and alarm to factory defaults.

It also deletes the phone pairing information.

From Casio's guide, page 22

Module 5746 specs

Type
solar
Power
Tough Solar (Solar powered)
Accuracy
±15 seconds per month (with no mobile link function)
Functions
World time, Stopwatch, Timer, Alarm/hourly time signal, Light, Light color, Calendar, Mute feature, Energy saving feature, Battery display/alert, Run time, 12/24-hour format, Day display, Hand shift feature, Progress beeper on/off
Manual
Casio's operation guide for module 5746

Watches with the 5746